【欧姆龙 omron CompoNet™ Gateway Unit for CC-Link Operation Manual】w489-e1-02_gq-crm21.pdf
【欧姆龙 omron CompoNet™ Gateway Unit for CC-Link Operation Manual】w489-e1-02_gq-crm21.pdf
- CompoNet Gateway Unit for CC-Link GQ-CRM21 OPERATION MANUAL
- About this Manual
- Using this Manual
- Terms and Conditions Agreement
- Safety Precautions
- Precautions for Safe Use
- Precautions for Correct Use
- Conformance to EC Directives
- Related Manuals
- Section 1 Overview
- 1-1 Overview
- 1-1-1 Overview of Gateway Unit
- 1-1-2 Gateway Unit Features
- Section 2 Description of Gateway Unit
- 2-1 Specifications
- 2-1-1 General Specifications
- 2-1-2 CC-Link Communications Specifications
- 2-1-3 CompoNet Communications Specifications
- 2-2 Component Names and Functions
- 2-2-1 Indications
- 2-2-2 Switch Settings
- 2-2-3 Terminal Arrangement
- 2-2-4 Dimensions
- Section 3 Wiring and Settings
- 3-1 Overview of Operating Procedures
- 3-1-1 Basic Startup Procedures
- 3-1-2 Procedure for Using the Registration Table
- 3-2 Installation Method
- 3-2-1 Mounting to a Control Panel
- 3-3 Wiring
- 3-3-1 General Wiring Precautions
- 3-3-2 Special Connector Tools
- 3-4 Wiring the Power Supply
- 3-4-1 Wiring the Power Supply to the Gateway Unit
- 3-4-2 Power Supply Wiring for CompoNet Slave Units and the CompoNet Network
- 3-5 Wiring the CompoNet Network
- 3-5-1 Wiring Methods for the CompoNet Network
- 3-6 Wiring the CC-Link Network
- 3-6-1 Recommended Materials and Tools
- 3-6-2 Wiring the Connector
- 3-7 Communications Settings
- 3-7-1 CompoNet Settings
- 3-7-2 CC-Link Settings
- Section 4 Remote I/O Communications
- 4-1 Exchanging Data
- 4-1-1 Basic Communications Operations
- 4-1-2 Confirming Normal Slave Unit Operation in Communications Modes 0 to 3
- 4-1-3 Registration Table
- 4-2 Memory Map
- 4-2-1 Overview
- 4-2-2 I/O Memory Allocations According to Communications Modes
- 4-2-3 Memory Map for Each Communications Mode
- 4-2-4 Status Area Allocations
- 4-2-5 Node Address Types on the CompoNet Network
- 4-2-6 Data Allocations for Word Slave Units
- 4-2-7 Data Allocations for Bit Slave Units
- 4-3 Remote I/O Communications Performance
- Section 5 Troubleshooting
- 5-1 Troubleshooting CompoNet Network Errors
- 5-1-1 CompoNet Network Errors
- 5-1-2 Troubleshooting Sequence When an Error Occurs
- 5-2 Troubleshooting CC-Link Network Errors
- Appendices
- A-1 Allocations According to Communications Modes
- A-2 Status Area Allocations According to Communications Modes
- A-3 Introduction to CompoNet Compliant Cable
- Revision History
- Contact
理工酷提示:
如果遇到文件不能下载或其他产品问题,请添加管理员微信:ligongku001,并备注:产品反馈